SERVICE PRESSURE:  1800 PSI / 124 BAR

TEST PRESSURE:  3000 PSI / 207 BAR

MATERIAL:  Every cylinder is produced from high strength aluminum alloy 6061-T6.

MARKINGS:  Cylinders are stamped with required U.S. Department of Transportation (DOT) and Transport Canada (TC) Markings.

FINISH:  Brushed body with natural unpainted dome is standard. Full body or shoulder only powder coating paint available.

CARRYING HANDLE:  Carrying handle installed on B10, B15, B20 & B35 cylinders only. Also, all of these sizes are available with valve protection cap.

REGULATION  &  INSPECTION:  All seamless aluminum alloy compressed gas cylinders are manufactured in accordance with U.S. Department of Transportation (DOT) 3AL and Transport Canada (TC) 3ALM requirements. Every cylinder is inspected and tested by a DOT and TC authorized independent inspection agency.

 

Part No.	Diameter	Length	Empty Weight	CO2 Capacity	Nitrogen Capacity	Water Capacity	Thread Size
	(in / mm)	(in / mm)	(lbs / kgs)	(lbs / liters)	(cu ft / liters)	(cu in / lbs / liters)
B35	8.00 / 203.0	37.2 / 944	33.5 / 15.2	35 / 15.9	101.0 / 2860	1428 / 51.5 / 23.4	1.125-12UNF-2B
B20	8.00 / 203.0	23.0 / 584	22.4 / 10.2	20 / 9.1	59.0 / 1665	829 / 29.9 / 13.6	1.125-12UNF-2B
B15	6.89 / 175.0	22.7 / 578	16.8 / 7.6	15 / 6.8	44.4 / 1246	614 / 22.1 / 10.0	1.125-12UNF-2B
B10	6.89 / 175.0	16.2 / 412	12.9 / 5.9	10 / 4.5	29.0 / 821	410 / 14.8 / 6.7	1.125-12UNF-2B
B5	5.25 / 133.3	13.7 / 348	6.1 / 2.8	5 / 2.3	14.5 / 411	205 / 7.4 / 3.4	1.125-12UNF-2B
B2.5	4.38 / 111.3	10.1 / 257	3.3 / 1.5	2.5 / 1.1	7.3 / 206	103 / 3.7 / 1.7	.750-16UNF-2B

 

Regulator Replacement Washers Qty: Type: Fiber Plastic Fiber $ .13/ea.   Plastic  $.25/ea.